SID range of dual-coil indirect storage tanks are suitable for installations with solar and other heat recovery systems. The units are manufactured with heavy gauge steel and protected from corrosion by an advanced glass-lining process. The range includes a selection of 6 models with capacities from 289 to 1007 litres.
- Single-wall spiral heat exchanger
- Glass-lined steel tank with two coils
- Output primary coil 27 – 58 kW
- Output secondary coil 46 – 87 kW
- Electrolytic protection – magnesium anode
| Output Primary Coil kW: | 27 – 58 |
| Output Secundary Coil kW: | 46 – 87 |
| Storage Volume Liters: | 289 – 1007 |
| Limited Tank Warranty: | 3 Years |
| Limited Parts Warranty: | 1 Years |
| Anode: | Sacrificial Anode |
| Water Connection Location: | Top |
The tanks shall be State Water Heaters SID series industrial indirect hot water storage calorifier, model number _SID_xxxx (400-1000L) or an approved equal. The tank shall be for vertical installation. Vessel shall be constructed to European Pressure Directive for minimum 7 bar working pressure. Vessel shall be glass-lined, have up to 3 sacrificial magnesium anodes for additional corrosion protection. Entire vessel shall be insulated with 70-100 MM insulation with ABS cladding. Heat loss will meet ErP standards. A combined temperature and pressure relieve valve will be factory supplied. Two factory-installed boiler water/solar heat exchangers will meet the heating requirement as specified for this project. The tank will have the option to install a back-up electric element up to 7.5 kW.
